Water is the leading cause of potholes in the City of Logan. During periods of prolonged rain and flooding, roads and infrastructure become more vulnerable to damage, resulting in an increase in potholes and other defects.
We actively monitor the condition of our roads, but potholes can appear unexpectedly. If you see one before we do, reporting it helps us respond faster and keep our roads safe.
Report a pothole:
Make sure you include the following information:
- road name
- suburb
- specific location of the pothole or a landmark, and the direction of travel
- photos if possible, showing as much detail of the location as possible.
Potholes form due to a combination of environmental and structural stressors. Several key factors contribute to pothole development, including:
- traffic volume
- drainage
- conditions of the road surface (for example cracking)
- other environmental factors (for example extreme weather)
It's common for the ground to contract and expand during alternating periods of dry and wet weather. This can cause the road surface to move, leading to imperfections such as surface cracking.
Water can infiltrate these cracks, allowing it to seep through the road surface. This water can become trapped and begin to weaken the more vulnerable road base materials.
Vehicles apply pressure on these weakened spots, causing damage that eventually leads to a pothole being formed.
Step 1: Preparation
Any loose debris in the pothole is removed where possible. This step may include cutting out the damaged area to ensure the patch has clean edges.
Step 2: Fill and compaction
A hot mix asphalt is shovelled into the pothole and compacted. In wet weather, a cold mix asphalt is used.
Step 3: Leveling
The filled pothole surface is levelled to match the surrounding pavement.
How long a pothole repair lasts depends on several factors:
- weather conditions
- type of material used
- condition during repairs
- traffic type and volume.
During wet weather, our crews use specialised repair methods to make roads safer and more serviceable as quickly as possible. Once conditions improve, some potholes may require additional repairs to provide a longer-lasting solution.
This approach allows us to address safety concerns promptly while planning and delivering more durable road rehabilitation projects.
For more information on resurfacing, visit the Road resurfacing.
Council manages more than 2,400 kilometres of road network across the city. We receive pothole requests daily, so we must prioritise which ones are fixed first. There are a few considerations that influence how we prioritise repair, such as:
- type of road - for example major arterial or local street
- traffic volume - the frequency and number of vehicles travelling on the road
- the severity of the damage
- location of the damage
What happens when you report a pothole:
- Customer sends a request to Council.
- Council’s Customer Service team creates a request in the system.
- Request is assigned to a Pothole and Pavement Repair team near that location.
- Pothole is repaired and request closed off.
If a pothole is considered urgent, the request is sent to the Rapid Response team to attend.
Potholes are repaired, typically within 3 days (subject to site and weather conditions).
To report a pothole
Make sure you include the following information:
- road name
- suburb
- specific location of the pothole or a landmark, and the direction of travel
- photos if possible, showing as much detail of the location as possible.